LaMella Remover

CF-0891 LaMella Commercial-Industrial Ceramic Floor Finish Urethane Remover

Uniquely formulated as a commercial ceramic floor stripper and remover.

Remover Urethane Floor StripperLaMella Remover is a powerful stripper designed to remove LaMella, Saniglaze, and other ‘tight-bonded’ finishes from ceramic and/or cementatious surfaces only. LaMella Remover requires approximately 30-45 minutes of dwell time and should be applied approximately 1/8″ to 1/4″ thick, coverage is approximately 100 sq. ft. per gallon. LaMella Remover is packaged as a “Ready-to-Use” product.  Apply by spreading with a 3/4″ roller cover.  LaMella Remover is non-corrosive, very low odor, and zero VOC’s (Consumer Goods Regulations).  LaMella Remover is extremely powerful: DO NOT use on any type of manufactured floor surfaces.

  • Low odor
  • MEA free (Monoethanolamine)
  • Non-corrosive
  • DOT Non-regulated (lower freight costs)
  • Coverage of ~125-200 sf/gallon

LaMella Remover and Urethane Stripper breaks and lifts the bond, creating the unique wrinkling, simply apply and extract or wet-vacuum the finish.

View LaMella Remover and Urethane Stripper Product Sheet

 

Application Areas:

  • Ceramic Surfaces
  • Cement Flooring
  • Natural Stone Floors

 

Green Notes: PreCept offers low-odor, zero VOC and MEA-free solutions for healthcare floors. PreCept products offer biodegradable, pH balanced solutions – see product pages for details.

contact-PPFPraetorian Protective Finishes is proud to offer a variety of system choices for commercial ceramic tile care.
For more information, contact us at info@goppf.com or by calling 952-895-6962.